HP Compaq NX9600 Hardware And Software Manual Download

Page: 106 / 199

Hardware and Software Guide

6–1

Hardware Options and

Upgrades

External Devices

The jacks, ports, and connectors described in this guide support
standard external devices.

■

For information about which jack, port, or connector to use,
refer to the documentation included with the device.

■

For information about installing or loading any software,
such as drivers, required by the device, refer to the
documentation included with the device.

To connect a standard external device to the notebook:

1. If you are connecting a powered device, turn off the device.

2. Connect the device to the connector on the notebook.

3. If you are connecting a powered device, plug the device

power cord into a grounded electrical outlet.

4. Turn on the device.

To disconnect a standard external device from the notebook, turn
off the device, and then disconnect the device from the notebook.

✎

If your notebook does not recognize the device, restart
the notebook.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands