HP Compaq NX9600 Hardware And Software Manual Download

Page: 118 / 199

Hardware Options and Upgrades

Hardware and Software Guide

6–13

Removing an ExpressCard

CAUTION:

To prevent loss of work or an unresponsive system, stop the

ExpressCard before removing it.

✎

Stopping an ExpressCard, even if it is not in use, conserves
power.

1. Close all applications and complete all activities that are

supported by the ExpressCard.

2. To stop an ExpressCard, select the

Safely Remove

Hardware

icon on the taskbar, and then select the

ExpressCard. (To display the Safely Remove Hardware icon
on the taskbar, click the arrow icon for Show Hidden Icons.)

3. Firmly press and quickly release the ExpressCard to

eject it

4. Slide the ExpressCard out of the slot

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands