HP Compaq NX9600 Hardware And Software Manual Download

Page: 152 / 199

8–2

Hardware and Software Guide

Communications

Connecting the Modem

WARNING:

To reduce the risk of electric shock, fire, or damage to the

equipment, do not plug a telephone cable into the RJ-45 (network) jack.

WARNING:

Connecting the notebook to a digital line can

permanently damage the modem. Immediately disconnect your modem
cable if accidentally connected to a digital line.

CAUTION:

Jacks for digital PBX systems may resemble RJ-11 telephone

jacks, but are not compatible with the modem.

A modem must be connected to an analog telephone line.

For more information on connecting and configuring your
modem, refer to the

Modem and Networking

guide on the

Notebook

Documentation

CD.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands