HP Compaq NX9600 Hardware And Software Manual Download

Page: 143 / 199

7–14

Hardware and Software Guide

Drives

Protecting Playback

CAUTION:

Inserting or removing any device while running any

multimedia application may pause or stop the play.

CAUTION:

Do not initiate Standby or Hibernation while using drive

media. Doing so may result in video and audio degradation and loss of
audio and video playback functionality.

If Standby or Hibernation is accidentally initiated during
playback:

■

You may see the warning message “Putting the computer into
Hibernation or Standby may stop the playback. Do you want
to continue?” Select

No.

(Audio and video may resume or

you may need to restart the disc.)

■

If Standby or Hibernation are initiated and no warning
message is displayed, restore from Hibernation or Standby,
and then restart the disc.

❏

Restore from Hibernation by briefly pressing the
power/standby button.

❏

Resume from Standby by briefly pressing the
power/standby button, using the TouchPad, or pressing
any key on the keyboard.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands