HP Compaq NX9600 Hardware And Software Manual Download

Page: 51 / 199

Power

Hardware and Software Guide

3–11

Initiating or Resuming from Standby

Task

Procedure

Result

Initiate Standby

With the notebook on, use
either of the following
procedures:

■

Press the

fn+f5

hotkey.

■

Select

Start > Turn off

Computer > Stand by.

■

The power/standby
light blinks.

■

The screen is cleared.

Allow the system
to initiate
Standby

■

If the notebook is running
on battery power, the
system initiates Standby
after 10 minutes of
notebook inactivity (default
setting).

■

If the notebook is running
on external power, the
system does not initiate
Standby.

■

Change power settings and
timeouts in the Power
Options window.

■

The power/standby
light blinks.

■

The screen is cleared.

Resume from
user-initiated or
system-initiated
Standby

Perform one of the following
actions:

■

Press the power/standby
button.

■

Press any key on the
keyboard.

■

Touch the TouchPad to
initiate TouchPad activity.

■

The power/standby light
is turned on.

■

Your work returns to
the screen.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands