when connected together. To prevent this, the user can power off all switches, connect the cables, and power
on together. The stack will form directly.
8.
The final VSF stack configuration after the stack formation will be:
Switch# show vsf
VSF Domain ID : 5472
MAC Address : b05ada-961103
VSF Topology : Ring
VSF Status : Active
Uptime : 0d 2h 26m
VSF MAD : None
VSF Port Speed : 1G
Software Version : WC.16.03.0000x
Mbr
ID MAC Address Model Pri Status
--- ------------- -------------------------------------- --- ----------
1 b05ada-961100 Aruba JL253A 2930F-24G-4SFP+ Switch 200 Commander
*2 b05ada-9721c0 Aruba JL260A 2930F-48G-4SFP Switch 150 Standby
3 b05ada-972200 Aruba JL254A 2930F-48G-4SFP+ Switch 100 Member
4 b05ada-96f080 Aruba JL259A 2930F-24G-4SFP Switch 100 Member
5 9cdc71-393440 Aruba JL253A 2930F-24G-4SFP+ Switch 100 Member
6 b05ada-962180 Aruba JL260A 2930F-48G-4SFP Switch 100 Member
7 b05ada-9631e0 Aruba JL254A 2930F-48G-4SFP+ Switch 100 Member
8 b05ada-96f000 Aruba JL259A 2930F-24G-4SFP Switch 100 Member
It indicates an eight-member VSF stack, with domain ID 5472. The stack topology is a ring, and the stack
interconnect ports are of 1G speed. The user is connected to the console of member 2.
NOTE:
The user can alternatively add a port to a VSF link keeping it in disabled state using
vsf
member 1 link 1 24 start-disabled
command. It is helpful when the user wants to keep
the VSF ports disabled, make the connections, and then enable them back. However, VSF ports
on each member have to be individually enabled for the stack formation.
Manual configuration with multiple ports bundled in a VSF link
In manual configuration of a switch with multiple ports bundled in a VSF link, up to eight VSF ports can be
aggregated in a single VSF link. This creates a load-balanced aggregate VSF connection with redundancy.
692
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
