Lists the friendly port name with its corresponding port number and port type. The
show name
command without
a port list shows this data for all ports on the switch.
Friendly port name data for all ports on the switch
switch(config)# show name
Port Names
Port Type Name
------ --------- ----------------------------
A1 10GbE-T
A2 10GbE-T
A3 10GbE-T [email protected]
A4 10GbE-T
A5 10GbE-T Draft-Server:Trunk
A6 10GbE-T Draft-Server:Trunk
A7 10GbE-T Draft-Server:Trunk
A8 10GbE-T Draft-Server:Trunk
Friendly port name data for specific ports on the switch
switch(config)# show name A3-A5
Port Names
Port : A3
Type : 10GbE-T
Name : [email protected]
Port : A4
Type : 10GbE-T
Name :
Port : A5
Type : 10GbE-T
Name : Draft-Server:Trunk
Including friendly port names in per-port statistics listings (CLI)
Syntax:
show interface <
port-number
>
Includes the friendly port name with the port's traffic statistics listing. A friendly port name configured to a port is
automatically included when you display the port's statistics output.
If you configure port A1 with the name "O'Connor_10.25.101.43," the
show interface
output for this port
appears similar to the following:
A friendly port name in a per-port statistics listing
switch(config)# show interface a1
Status and Counters - Port Counters for port A1
Name : O’[email protected]
MAC Address : 001871-b995ff
Link Status : Up
Totals (Since boot or last clear) :
Bytes Rx : 2,763,197 Bytes Tx : 22,972
Unicast Rx : 2044 Unicast Tx : 128
Bcast/Mcast Rx : 23,456 Bcast/Mcast Tx : 26
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Chapter 3 Port Status and Configuration
93
