exit
switch(config)#
Show commands to show the SHA of a configuration
The
show
commands provide SHA details of the running and startup configurations.
show hash
Syntax
show {config | running-config} hash {recalculate}
Description
Shows SHA ID of startup or running configuration.
Command context
config
Examples
switch#
show config
config
files List saved configuration files.
hash Display the hash calculated for the startup
configuration.
interface Show the startup configuration for interfaces.
oobm Show the startup configuration for OOBM.
To display the hash calculated for the startup configuration:
switch(config)# show config hash
The hash must be calculated. This may take several minutes.
Continue (y/n)? y
Calculating hash...
Startup Configuration hash:
4f66 8b77 6b66 e5fb 0c12 f7fb 8ea6 b548 af2e 2e03
This hash is only valid for comparison to a baseline hash if
the configuration has not been explicitly changed (such as
with a CLI command) or implicitly changed (such as by the
removal of a hardware module).
switch(config)# show config hash
recalculate Calculate hash (if needed) without prompting.
switch(config)# show config hash recalculate
Startup Configuration hash:
4f66 8b77 6b66 e5fb 0c12 f7fb 8ea6 b548 af2e 2e03
This hash is only valid for comparison to a baseline hash if
the configuration has not been explicitly changed (such as
with a CLI command) or implicitly changed (such as by the
removal of a hardware module).
574
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
