Figure 37: Using the copy command to download and configure an ACL
on page 363), and continues to
implement the remaining ACL commands in the file.
Figure 37: Using the
copy
command to download and configure an ACL
switch(config)# copy tftp command-file 10.38.124.18 v1an10_in.txt pc
Running configuration may change, do you want to continue [y/n]? y
1. ip access-list extended "155"
2. deny tcp 0.0.0.0 255.255.255.255 10.10.10.2 0.0.0.0 eq 23 1og
3. permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
4. show running
Command files are limited to access-list commands.
1
5. exit
Switch(config)# show running
2
Running configuration:
; J9091A Configuration Editor; Created on release #W.15.05.0000x
; Ver #01:01:00
hostname "Switch"
cdp run
ip default-gateway 10.38.248.1
logging 10.38.227.2
snmp-server community "public" unrestricted
ip access-list extended "155"
deny tcp 0.0.0.0 255.255.255.255 10.10.10.2 0.0.0.0 eq 23 1og
permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
exit
1
This message indicates that the
show running
command just above it is not an ACL command and will be
ignored by the switch.
2
Manually executing the
show running
from the CLI indicates that the file was implemented, creating ACL 155
in the switch’s running configuration.
Xmodem: Uploading an ACL command file from a serially connected PC or
UNIX workstation (CLI)
Syntax:
copy xmodem command-file {<unix | pc>}
Uses Xmodem to copy and execute an ACL command from a PC or UNIX workstation. Depending on the ACL
commands used, this action does one of the following in the running-config file:
• Creates a new ACL.
• Replaces an existing ACL. (See "Creating an ACL Offline" in the "Access Control Lists (ACLs)" in the latest
access security guide for your switch.)
• Adds to an existing ACL.
Single copy command
When a switch crashes, five files relating to the crash; core-dump, crash-data, crash-log, fdr-log, and event-log
are created and should be copied for review. All five files (core-dump, crash-data, crash-log, fdr-log, and event-
log) should be copied to a destination specified under a directory by file name.
Chapter 11 File Transfers
363
