HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual Download Page 11

Page: 11 / 126

HP StorageWorks 1500 Modular Smart Array installation guide

Rack stability

WARNING!

To reduce the risk of personal injury or damage to equipment:

•

Extend leveling jacks to the floor.

•

Ensure that the full weight of the rack rests on the leveling jacks.

•

Install stabilizing feet on the rack.

•

In multiple-rack installations, secure racks together.

•

Extend only one rack component at a time. Racks may become unstable if more than one

component is extended.

HP technical support

Telephone numbers for worldwide technical support are listed on the HP support website:

http://www.hp.com/support/

Collect the following information before calling:

•

Technical support registration number (if applicable)

•

Product serial numbers

•

Product model names and numbers

•

Applicable error messages

•

Operating system type and revision level

•

Detailed, specific questions

For continuous quality improvement, calls may be recorded or monitored.
HP strongly recommends that customers sign up online using the Subscriber's choice website at

http://www.hp.com/go/e-updates

•

Subscribing to this service provides you with e-mail updates on the latest product enhancements,

newest versions of drivers, firmware documentation updates, and instant access to numerous

other product resources.

•

After signing up, you can quickly locate your products by selecting

Business support

and then

Storage

under Product Category.

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive































































































































Search results

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Reviews:

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Installation Manual

Search results

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Reviews:

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands