HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual Download Page 8

Page: 8 / 126

Prerequisites

Prerequisites for installing this product include:

•

Determine who will install and configure your MSA.
A moderate knowledge level about SANs and their components is required to install this storage

array system.
If you are not familiar with installing and configuring storage array systems in a SAN, HP can

install your MSA for you. For more information, see ”

Intended audience

” on page 7.

•

Complete the planning worksheet on the installation and configuration overview poster.
The poster is a companion to this installation guide and should be used to verify that you have

all of the necessary and supported components for successfully installing your MSA in your

operating system environment.

•

Become familiar with and periodically review content on the MSA1500 website:

http://www.hp.com/go/msa1500cs

• Go to the

Technical documentation

page to locate and read the latest documentation,

including release notes (late-breaking and supplemental information about the MSA), and

the compatibility guide (important reference information and specifications).

• Go to the

Software, Firmware & Drivers

page to learn about recent firmware enhancements

and support options.

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive































































































































Search results

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Reviews:

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Installation Manual

Search results

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Reviews:

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands