manualshive.com logo in svg

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Installation Manual

The HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive offers exceptional storage capabilities. Get the most out of this product with our comprehensive Maintenance And Service Manual, available for free download at manualshive.com. The manual provides essential information for proper maintenance and troubleshooting.

Share
Download
background image

Installation procedures—All deployments

18

Go to the Internet for the most recent MSA and SAN information

HP recommends going to the following websites to learn more about MSA devices and Storage 

Area Networks (SANs). Information found at these websites may offer suggestions, alternatives, or 

changes to your installation plans.

Table 3

MSA1500 and SAN-related websites 

Website Content

MSA

1500

 

http://www.hp.com/go/msa1500cs

Latest MSA

1500

 information, including:

•

Release notes

—

latest MSA

1500

 information

•

Compatibility guide

—

supported operating systems, hardware 

components, and network configuration limitations

•

Quickspecs

—

technical information

•

Link to the MSA

1500

-specific Support website

Support

http://www.hp.com/support

Latest support information about all HP products, including the MSA

1500

:

•

Available downloads for firmware, software, and drivers

•

Troubleshooting information, including all outstanding customer 

advisories

SAN Infrastructure

http://www.hp.com/go/san

HP switch and HBA information
Locate, print, and read the SAN Design reference guide, which details 

SAN design considerations and rules, common topologies, security, and 

best practices.

High Availability

h18000.www1.hp.com/solutions/

enterprise/highavailability/

index.html

 

Clustering information
In addition to specific information about clustering, this website contains a 

variety of planning and best practices documents that are applicable to 

most server and storage sub-systems.

HP Systems Insight Manager

www.hp.com/go/hpsim

 

System management information
HP Systems Insight Manager (HP-SIM) is a client/server application used to 

remotely manage HP hardware in a network environment. HP-SIM reports 

hardware fault conditions (failure and pre-failure) and collects data for 

reporting and graphing. 
HP-SIM is an extensible, standards-based management client software 

product built on the Storage Management Initiative Specification (SMI-S) 

for its storage management capabilities.

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive































































































































Reviews:

No comments

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands

Load more brands