HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual Download Page 69

Page: 69 / 126

HP StorageWorks 1500 Modular Smart Array installation guide

Install the HBA driver on the new kernel by entering:

./INSTALL -f

If not already connected, connect the MSA to the SAN.

NOTE:

To build an HBA driver from source code or manually patch the Linux kernel, see the

README file in the

/opt/hp/src/hp_qla2x00src

directory on the server.

To install the HP System Management Homepage:

NOTE:

The System Management Homepage must be installed prior to the ACU.

Navigate to the

/SMH/Linux

directory on the CD.

List the contents of the directory and identify the installation rpm file for your environment.

Copy the file to a directory on the server.

Change to the server directory of the file and un-tar the installation file by entering:

tar -zxvf <SMH_tar_filename>

(Where

<SMH_tar_filename>

is the name of the System Management Homepage .zip

file.)

Install the System Management Homepage by entering:

rpm -ivh <SMH_rpm_filename>

(Where

<SMH_rpm_filename>

is the name of the System Management Homepage rpm.)

To install the Array Configuration Utility (ACU):

NOTE:

• You must remove earlier versions of the ACU before installing later versions.
• You must install the HP System Management Homepage before installing the ACU.
• For information about using the ACU or the ACU-CLI, see ACU online help or the

Array Configuration Utility User Guide

Navigate to the

/ACU/Linux/x86

directory on the CD.

List the contents of the directory and identify the ACU installation rpm file for your

environment.

Install the ACU by entering:

rpm -ivh <ACU_rpm_filename>

(Where

<ACU_rpm_filename>

is the name of the ACU rpm.)

NOTE:

Warning messages regarding driver version dependencies may be displayed. These

messages do not affect the MSA and may safely be ignored.

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive































































































































Search results

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Reviews:

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Installation Manual

Search results

Summary of Contents for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Reviews:

Related manuals for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Brands by name

Popular brands