HP 8590 E-Series, Calibration Manual

Page: 535 / 693

Amplitude Specications
Amplitude specications do not apply for mode and negative peak
detector mode except as noted in \Amplitude Characteristics ."
Amplitude Range 022 dBV to +137 dBV
Maximum Safe Input Level
A verage Continuous P ower +137 dBV (1 W , 7.1 V rms), input attenuation 10 dB in bands 1 through 4.
P eak Pulse P ower +157 dBV (100 W) for <10 s pulse width and <1% duty cycle , input
attenuation 30 dB .
dc 0 Vdc
Quasi-P eak Detector Specications (All except Option 703)
The specications for Quasi-P eak Detector have been based on the following:
The EMC analyzer displays the quasi-peak amplitude of pulsed radio frequency (RF) or
continuous wave (CW) signals .
Amplitude response conforms with Publication 16 of Comit e International Sp ecial des
P erturbations Radio electriques (CISPR) Section 1, Clause 2.
Absolute amplitude accuracy is the sum of the pulse amplitude response relative to the reference ,
plus the reference pulse amplitude accuracy , plus the EMC analyzer amplitude accuracy
(calibrator output, reference level, frequency response , input attenuator , IF bandwidth switching,
linear display scale delity , and gain compression).
5-6 HP 8593EM Specications and Characteristics