HP 8590 E-Series, Calibration Manual

Page: 545 / 693

Amplitude Characteristics
Measurement Detector Types P ositive P eak, Quasi-P eak, and A verage
Quasi-P eak and A verage time constants conform
with CISPR Pub . 16.
(Option 101 and Option 301) Negative P eak
(Option 703) Delete Quasi-P eak and A verage
IF Overload Detector A vailable in EMC analyzer mode only .
Detects overload of the analyzer video circuitry .
Input Attenuation Uncertainty*
Attenuator Setting 9 kHz to 12.4 GHz 12.4 to 19 GHz 19 to 22 GHz
0 dB 60.75 dB 61.0 dB 61.0 dB
10 dB Reference Reference Reference
20 dB 60.75 dB 60.75 dB 61.0 dB
30 dB 60.75 dB 61.0 dB 61.25 dB
40 dB 60.75 dB 61.25 dB 62.0 dB
50 dB 61.0 dB 61.5 dB 62.5 dB
60 dB 61.5 dB 62.0 dB 63.0 dB
70 dB 62.0 dB 62.5 dB 63.5 dB
* Referenced to 10 dB input attenuator setting. See the \Frequency Response" table under \Specications".
Input Attenuator 10 dB Step Uncertainty (Attenuator setting 10 to 70 dB)
Center Frequency
9 kHz to 19 GHz 61.0 dB/10 dB
19 GHz to 22 GHz 61.5 dB/10 dB
Input Attenuator Repeatability 60.05 dB
5-16 HP 8593EM Specications and Characteristics