HP 8590 E-Series, Calibration Manual

Page: 678 / 693

Error Messages
Check the EMC analyzer display for error messages . Refer to Appendix A of
the HP 8590 EM-Series EMC Analyzer Quick R eference Guide.
If the EMC Analyzer with the RF Filter Section Does Not Seem
to be W orking
Check that the ac power is connected to the system as described above in \If
Y our EMC Analyzer Does Not Turn On ".
V erify that the rear-panel auxiliary interface cable is properly connected.
V erify that the rear-panel sweep ramp and high sweep cables are properly
connected.
V erify that the RF lter section DIP switch near the service bus connecter is
set to the normal mode .
If the RF Filter Section Does Not P ower O
V erify that the service power switch on the RF lter section is set to normal
mode .
A dditional Support Services
CompuServe
CompuServe , the worldwide electronic information utility , provides technical
information and support for EMC instrumentation and communication with
other EMI users .
With a CompuServe account and a modem-equipped computer , simply
type GO HPSYS and select the EMC system section to get information on
documentation, application notes , product notes , service notes , software ,
rmware revision listings , data sheets , and more .
If you are not a member of CompuServe and would like to join, call
CompuServe and take advantage of the Free Introductory Membership . The
membership includes the following:
Customer Support 10-3