HP 8590 E-Series, Calibration Manual

Page: 600 / 693

Amplitude Specications
Reference Level
Range
Log Scale Minimum amplitude to maximum amplitude*
Linear Scale +8 dBV to maximum amplitude*
Resolution
Log Scale 60.01 dB
Linear Scale 60.12% of reference level
A ccuracy (referenced to +87 dBV reference level, 10 dB
input attenuation, at a single frequency , in a
xed IF BW)
107 dBV to +47.1 dBV 6(0.3 dB + .01 2 dB from +87 dBV)
+47 dBV and below
1 kHz to 3 MHz IF BW 6(0.6 dB + .01 2 dB from +87 dBV)
30 Hz to 300 Hz IF BW 6(0.7 dB + .01 2 dB from +87 dBV)
* See \Amplitude Range ."
Frequency Response (dc coupled) (10 dB input attenuation)
Absolute
*
Relative Flatness
y
9 kHz to 2.9 GHz 61.5 dB 61.0 dB
2.75 GHz to 6.5 GHz (preselector peaked) 62.0 dB 61.5 dB
*
Referenced to 300 MHz CAL OUT .
y
Referenced to midpoint between highest and lowest frequency response deviations .
Calibrator Output
Amplitude +87 dBV 60.4 dB
Absolute Amplitude Calibration
Repeatability
*
60.15 dB
*
Repeatability in the measured absolute amplitude of the CAL OUT signal at the reference
settings after CAL FREQ and CAL AMPTD self-calibration. Absolute amplitude reference settings
are: Reference Level +87 dBV ; Input Attenuation 10 dB; Center Frequency 300 MHz; IF BW 3
kHz; A VG BW 300 Hz; Scale Linear; Span 50 kHz; Sweep Time Coupled, T op Graticule (reference
level), Corrections ON, DC Coupled.
HP 8595EM Specications and Characteristics 7-9