HP 8590 E-Series, Calibration Manual

Page: 72 / 693

9. Frequency Span Readout A ccuracy , HP 8593EM , HP 8594EM , HP 8595EM , and HP 8596EM
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
More 1 of 3
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
More 2 of 3
NNNNNNNNNNNNNNNNNNNNNNNNNN
MARKER 1
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
More 3 of 3
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NEXT PEAK
16. Record the MKR-1 frequency reading in TR Entry 7 of the performance
verication test record.
17. Repeat steps 15 and 16 for the 300 Hz EMC analyzer span setting.
18. V erify that the 300 Hz span setting is within 225 Hz to 255 Hz.
T able 2-5. Frequency Span Readout A ccuracy
EMC Analyzer
Span Setting
Synthesizer/Level
Generator
Frequency
Synthesized Sweeper
Frequency
MKR-1 Reading
MHz MHz Min. TR Entry Max.
10.10 MHz 66.000 74.000 7.70 MHz 2 8 .30 MHz
10.00 MHz 66.000 74.000 7.80 MHz 3 8 .20 MHz
100.00 kHz 69.960 70.040 78 .00 kHz 4 82 .00 kHz
99.00 kHz 69.960 70.040 78 .00 kHz 5 82 .00 kHz
10.00 kHz 69.996 70.004 7.80 kHz 6 8 .20 kHz
1.00 kHz 69.9996 70.0004 0.78 kHz 7 0 .82 kHz
300.00 Hz
1
69.99988 70.00012 225 .00 Hz | 255 .00 Hz
1 This is not an EMC analyzer specication; however , the 300 Hz span is tested to 65 % to keep
the narrow bandwidth accuracy and residual FM measurement uncertainty at a minimum. If
the 300 Hz span accuracy is >5% the additional measurement uncertainty may need to be
included for the bandwidth accuracy and residual FM measurement uncertainties .
P erformance V erication T ests 2-43