HP 8590 E-Series, Calibration Manual

Page: 165 / 693

22. Frequency Response , HP 8595EM
31. Replace the power sensor with the 50 termination.
32. On the EMC analyzer , press the following key:
4
MKR !
5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MARKER ! HIGH
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
More 1 of 3
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
More 2 of 3
NNNNNNNNNNNNNNNNNNNNNNNNNN
MARKER 1
4 MKR 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
More 1 of 3
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MK TRACK ON OFF (ON)
33. Set the EMC analyzer center frequency and the synthesizer frequency to
the frequencies listed in T able 2-37 .
34. At each frequency , adjust the synthesizer/level generator amplitude
for a MKR 1-TRK amplitude reading of 0.00 60.05 dB . Record the
synthesizer/level generator Amplitude Setting in T able 2-37 as the
synthesizer/level generator Amplitude .
35. F or each of the frequencies in T able 2-37 , subtract the synthesizer/level
generator Amplitude Reading (column 2) from the synthesizer/level
generator Amplitude Setting (50 MHz) recorded in step 50. Record the result
as the Response Relative to 50 MHz (column 3) of T able 2-37 .
36. A dd to each of the Response Relative to 50 MHz entries in T able 2-37 the
measuring receiver Reading for 50 MHz listed in T able 2-35. Record the
results as the Response Relative to 300 MHz (column 4) in T able 2-37 .
2-136 P erformance V erication T ests