HP 81200, User Manual, Page: 164 / 240

Creating and Editing Segments How to Create a New Segment
164
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
If you have highlighted a block of data, the context menu provides
additional options:
Figure 88 Segment Editor – Extended Context Menu for Editing Data
You can:
• Copy the block onto the clipboard (it can then be pasted somewhere
else).
•
Set the whole block to 1, or 0, or don’t care (if the state coding is 0x1).
•
Mirror the block contents horizontally or vertically.
• Invert the bits contained in the block.
N O T E
You can also paste captured data from the Error State Display. For details
see “How to Transfer Captured Data Into a Segment” on page 190 .
Segment Editor Shortcuts and Defaults
The cursor movement is from left to right and from top to down. If a block
is highlighted, the cursor moves within that block.
Page Up and Page Down keys scroll through the data segment with the
number of lines actually visible in the editor window.
The Home key moves the cursor to the vector number 0x0 in hexadecimal
(equals decimal 0) and the highest trace number.
The End key moves the cursor to the highest vector number and trace
number 0.
The Scroll Bar at the right side of the editor window helps to position the
cursor in the middle portion of a large data segment.
To cancel a selection, press Esc or click outside the block.
To highlight the whole segment, click the segment label.