HP 800 Series, User Manual

Page: 75 / 586

System Configuration
Management Server
3-27
b. Select a time zone from the Time zone drop-down list.
2. Click
ok
.
Enabling SNMP
To select SNMP settings:
Home window>>System configuraton>>Management server>>SNMP
settings
1. Select the
Enable SNMP
check box to select the
SNMP settings
.
a. Enter the SNMP read community string.
b. Enter the SNMP allowed source network. The value must be either
“default” or a network specified in CIDR notation.
2. Select the
Outgoing SNMP notifications
check box.
3. Enter a comma-separated list of IP address or hostnames that can receive
the SNMP notifications.
4. Enter the community string used to authorize SNMP notifications from
NAC 800.
5. Select one or both of the following:
a. Select the Resend notifications check box and enter the resend interval,
for example 60.
NOTE:
NAC policy tests can be configured such that if an endpoint fails the test, it
will be granted network access temporarily. In these cases, it might be
desirable not to send an SNMP notification.
b. Select the
Do not send notifications when an endpoint has been granted
temporary network access check box to disable these notifications.
Modifying the MS root Account Password
To change the MS root account password:
Home window>>System configuration>>Management server
1. Enter the new password in the
Root password
text box in the
Other settings
area.
2. Re-enter the password in the
Re-enter root password
text box.