HP 800 Series, User Manual

Page: 409 / 586

DHCP Plug-in
DHCP Plug-in and the NAC 800 User Interface
13-11
Enabling the Plug-in and Adding Servers
To enable the DHCP plug-in and add the DHCP servers:
Home window>>System configuration>>Quarantining
1. Select the DHCP radio button in the Quarantine area.
2. Select the
DHCP servers using the DHCP plug-in
radio button (figure 13-2).
NOTE:
Changes made while one or more DHCP servers cannot be communicated
with will be sent to those DHCP servers as soon as communication is re-
established.
3. Select
Add a DHCP plug-in configuration
. The
Add DHCP plug-in configuration
window appears as shown in the following figure:
4. Enter the IP address or host name of the DHCP server where the plug-in
is to be installed in the
DHCP server hostname or IP address
text box.
5. Enter the port number on the DHCP server that listens for plug-in requests
in the
Plug-in listening port
text field.
6. Enter a brief description of this DHCP server's purpose in the Server
description
text field.
7. Select a Plug-in logging level , where:
•
error
– Log error-level messages only (least amount of detail)
•
warning
– Log warning-level and above messages only
• info – Log debug-level and above messages only
Figure 13-7. Add DHCP Plug-in Configuration