HP 800 Series, User Manual

Page: 434 / 586

System Administration
System Settings
15-10
TIP:
You must reset the system before you can change the personality of the server;
that is, before you can change an MS to and ES or an ES to a MS.
To reset your system to the as-shipped state:
Command line window
1. Log in as
root
to the NAC 800 MS or ES, either using SSH or directly with
a keyboard.
2. Enter the following command at the command line:
resetSystem.py [both | ms | es]
Where:
No arguments – The system is reset to the same type (either a single-server
installation with the MS and ES on the same server, an MS, or an ES), the
database is cleared, and the property files are restored to their defaults
both
– The system is reset to be a single-server installation (MS and ES
on one server), the database is cleared, and the property files are restored
to their defaults
ms
– The system is reset to be an MS, the database is cleared, and the
property files are restored to their defaults
es
– The system is reset to be an ES, the database is cleared, and the
property files are restored to their defaults.
TIP:
See the installation guide for instructions on resetting the system using the
LCD panel.
NOTE:
The resetSystem.py file is in the following directory:
cd /usr/local/nac/bin