HP 800 Series, User Manual

Page: 226 / 586

End-user Access
Windows Endpoint Settings
5-20
14. Select TCP 445 .
15. Click
Change Scope
.
16. Verify that the My network (subnet) only radio button is selected.
17. Click
OK.
18. Select UDP 138 .
19. Click
Change Scope
.
20. Verify that the My network (subnet) only radio button is selected.
21. Click
OK.
22. Click OK.
23. Click
OK.
TIP:
You can add more security by specifying the endpoints allowed for File and
Print Sharing as follows:
Select File and Print Sharing, Click Edit, Select Change Scope, and select
either My Network or Custom List (and then specify the endpoints).
ActiveX Test Method
Ports Used for Testing
You might need to configure some firewalls and routers to allow NAC 800 to
access port 1500 for ActiveX testing.
TIP:
See “Ports used in NAC 800” on page E-1 for a complete description of the
ports used in NAC 800.
Windows Vista Settings
All Windows Vista endpoints must have administrator permissions in order
for the ActiveX component to install successfully. If the end-user is not logged
in to the endpoint with administrator permissions, the following occurs:
■ If User Account Control (UAC) is enabled, Windows Vista prompts
you for credentials. After the credentials are entered, the ActiveX
component installs.
■
If UAC is disabled, the ActiveX component installation fails without
notifying the end-user.