HP 800 Series, User Manual

Page: 397 / 586

Remote Device Activity Capture
NAC 800 to Infoblox Connector
12-21
2. In the Basic 802.1X settings area, select the remote Endpoint detection
location
radio button.
3. Click
ok
.
Command line window
NOTE:
Perform the following steps on each ES in your system.
4. Log in as
root
to the NAC 800 ES using SSH or directly with a keyboard.
5. Enter the following command:
egrep DeviceActivityCapture /usr/local/nac/
properties/nac-es.properties
The expected results are:
Compliance.DeviceActivityCapture.RunningRemotely=tru
e
It can take a minute or two Contact ProCurve Networking by HP ( ) if your
results are different.
NOTE:
It can take a minute or two after changing the property in the user interface
for the change to propagate to all ESs.
6. Edit the configuration file:
a. Open the following file with a text editor such as
vi
:
/etc/syslog-ng/syslog-ng.conf
b. In the
### SOURCE ENTRIES HERE ###
area, add the following line:
source rdac { tcp(); };
c. In the
### DESTINATION ENTRIES HERE ###
area, add the
following line:
destination d_dac { program("/usr/local/nac/bin/
syslog-to-dac.py"); };