manualshive.com logo in svg

HP 800 Series, User Manual, Page: 166 / 586

Share
Download
HP 800 Series User Manual Download Page 166

System Configuration

Cluster Setting Defaults

3-118

To disable email notifications:

Home window>>System configuration

1.

Select a cluster. The 

Enforcement cluster

 window appears. 

2.

Select the 

Notifications

 menu item.

3.

Select the 

For this cluster, override the default settings

 check box.

4.

Select 

Do not send email notifications

. 

5.

Click 

ok

.

End-user Screens

The 

End-user screens

 menu option allows you to configure the end-user 

screens with the following:

■

Define logo image to be displayed

■

Specify text to be displayed on end-user screens

■

Optionally define a pop-up window as an end-user notification when 
an endpoint fails one or more tests

The end-user screens are shown in “End-user Access” on page 5-1.

Specifying an End-user Screen Logo

To specify an end-user screen logo:

Home window>>System configuration>>End-user screens

Summary of Contents for 800 Series











































































































































































































































































































































































































































































































































































































Reviews:

No comments