HP 800 Series, User Manual

Page: 433 / 586

System Administration
System Settings
15-9
Changing the MS Host Name
To change the MS host name:
See “Modifying MS Network Settings” on page 3-23.
Changing the ES Host Name
To change the ES host name:
See “Changing the ES Network Settings” on page 3-16.
Changing the MS or ES IP Address
To change the MS or ES IP address:
The preferred method is to use the user interface:
■ “Modifying MS Network Settings” on page 3-23
■
“Changing the ES Network Settings” on page 3-16
However, if you cannot access the user interface, use the following instruc-
tions:
1. Log in to the MS or ES as root using SSH or directly with a keyboard.
2. Enter the following command at the command line:
network-settings.py
<ip address> <netmask> <gateway>
Where:
<ip address> is the new IP address for the MS or ES. For example,
192.168.40.10
<netmask> is the netmask. For example, 255.255.255.0
<gateway> is the gateway. For example, 10.1.1.1
Resetting your System
There are times when you may wish to revert to the as-shipped state for your
system; reverting the configuration and database to that of a freshly installed
system.