HP 800 Series, User Manual

Page: 224 / 586

End-user Access
Windows Endpoint Settings
5-18
TIP:
See “Ports used in NAC 800” on page E-1 for a complete description of the
ports used in NAC 800.
Allowing the Windows RPC Service through the Firewall
If end-users enable the XP SP2 Professional firewall, they need to change the
configuration to allow the agentless testing.
TIP:
These firewall configuration methods can be configured using the Windows
Group policy and pushed out to all users of a Windows domain.
The following method is the recommended method:
To configure the Windows XP Professional firewall to allow the RPC service
to connect:
Windows endpoint>>Start>>Settings>>Control Panel>>Windows
Firewall>>Advanced tab>>Settings button
1. Click Add .
2. In the
Service Settings
window, enter the following information:
Description : NAC 800 Server 137
IP
: <IP of the NAC 800 Server>
External port number
: 137
Select UDP .
3. Click
OK.
4. Click
Add
.
5. In the
Service Settings
window, enter the following information:
Description
: NAC 800 Server 138
IP
: <IP of the NAC 800 Server>
External port number : 138
Select
UDP
.
6. Click OK.
7. Click
Add
.
8. In the Service Settings window, enter the following information:
Description
: NAC 800 Server 139