HP 800 Series, User Manual

Page: 198 / 586

Endpoint Activity
Acting on Selected Endpoints
4-20
NOTE:
If an endpoint that has been granted or denied access temporarily by the
administrator disconnects, the next time the endpoint attempts to connect it
will be retested; the previous temporary status no longer applies.
Immediately Quarantine an Endpoint
To immediately quarantine an endpoint:
Home window>>Endpoint activity
1. Select a box or boxes to select the endpoints of interest.
2. Click
change access
.
3. Select the Temporarily Quarantine for radio button.
4. Select
minutes
,
hours
, or
days
from the drop-down list.
5. Enter the number of minutes, hours, or days that the endpoint will be
temporarily quarantined.
6. Click ok .
TIP:
To quarantine again, select the endpoint, click change access, select Clear
temporary access control status, and click ok.
Clearing Temporary Endpoint States
Endpoints can have a temporary state designated through the Quarantine for
or
Allow access for
radio buttons.
To clear a temporary state set by the admin:
Home window>>Endpoint activity
1. Select a box or boxes to select the endpoints of interest.
2. Click change access .
3. Select the
Clear temporary access control status
radio button.
4. Click ok .