HP 800 Series, User Manual

Page: 333 / 586

802.1X Quarantine Method
Setting up the 802.1X Components
11-19
h. Open the Certificates folder under the Console Root .
i. Right-click on the
Personal
folder and select
All Tasks>>Request New
Certificate
.
NOTE:
To import the certificate manually:
1. Right-click on the Personal folder>>select All Tasks>>Import.
2. When the wizard opens, click Next.
3.Enter the path to the NAC 800 certificate, for example:
D:\support\ias\compliance.keystore.cer
4.Click Next, Next, and Finish.
j. Follow the instructions to generate a certificate request. If there are
no certificate templates available you need to edit the certificate
template permissions (in
mmc
add the certificate template snap-in,
right-click on the template, select properties , and change the
permissions for your user) on the certificate authority. The Computer
or RAS and IAS templates both work.
k. Once the Certificate is granted by the certificate authority, return to
the IAS policy editor to continue the setup.
l. Click
Configure
to configure the certificate for use with the PEAP
authentication method. The Protected EAP Properties window
appears (figure 11-18).
m. Select the certificate you created in the previous steps, select the EAP
types you want to use, and click OK .
n. Once the Certificate is granted by the certificate authority, edit the
IAS policy.
o. On the
authentication
tab click
authentication methods
.
p. Select PEAP and click Edit .
q. Select the new certificate and click
Apply
.