HP 800 Series, User Manual

Page: 445 / 586

System Administration
Managing Passwords
15-21
Resetting the NAC 800 Server Password
If you can remember the NAC 800 user interface password, but cannot
remember the
root
login password for the NAC 800 MS or ES, log in to the
NAC 800 user interface and navigate to one of the following windows:
To reset the MS Password:
Home>>System configuration>>Management server
1. In the
Other settings
area, enter the new password.
2. Click ok .
To reset the ES Password:
Home>>System configuration>>Enforcement clusters & servers>>Click a
server name>>Configuration
1. In the Other settings area, enter the new password.
2. Click
ok
.
If you cannot remember either password, you can either reset the appliance
mode, or boot to the system partition and recover the whole application
partition which resets all of the passwords, losing any configuration settings
in the process. Instructions for booting to the system partition are beyond the
scope of this document.
To reset the appliance mode:
On the appliance’s LCD, reset the server mode (personality). See the installa-
tion guide for instructions on setting and changing the personality.
Novell eDirectory Manually entered after installation on the
System
configuration>>Quarantining>>802.1X
Quarantine method radio button window. Novell eDirectory password recovery is
beyond the scope of this document.
NAC 800
password Set during Recovery process
Table 15-4. NAC 800 Passwords