HP 800 Series, User Manual

Page: 457 / 586

System Administration
VLAN Tagging
15-33
e. Append the following line to the bottom of the file:
VLAN=yes
f. Modify the
IPADDR
line if needed.
g. Save and exit the file.
h. Restart the network interface by entering the following at the
command line:
service network restart
2. Change the interface the EDAC listens on:
a. Log in to the MS using SSH or directly with a keyboard.
b. For 802.1X mode, enter the following command at the command line:
setProperty.py -c
<cluster name>
Compliance.ObjectManager.NACModeTcpdumpInterface=
eth1:1
c. For DHCP mode, enter the following command at the command line:
setProperty.py –c
<cluster name>
Compliance.ObjectManager.DDHCPModeDHCPInterface=e
th1:1
3. Verify the change:
a. Log in to each ES using SSH or directly with a keyboard.
b. Enter the following command at the command line:
ifconfig
c. Verify that the virtual interface you created is listed.
d. Open the following file:
/var/log/nac/nac-es.log