88
4 Summary of the HP/Phoenix BIOS
HP/Phoenix BIOS (BIOS version: GX.07.xx)
be
locked
, so as to prevent the exporting of data. Writes to the hard disk
drive boot sector can also be
locked
, for instance as a protection against
viruses.
Under the “Start-Up Center” sub-menu, the
Setup
program not only allows
the user to select which devices are to be used (
yes
or
no
) for booting up
the system, but also indicates their order of precedence when more than one
is enabled: flexible disk drive, CD-ROM drive, or hard disk drive.
Power Menu (BIOS version: GX.07.xx)
The “Power” menu allows the user to set the standby delay. It also allows the
system administrator to decide whether the mouse is enabled as a means of
reactivating the system from
Standby
. It is also possible to specify whether
the space-bar is enabled as a means of reactivating the system from
Off
.
Summary Configuration Screen (BIOS version: GX.07.xx)
You can press
while the initial “Vectra” logo screen is being displayed to
run the
Setup
program (as described in the previous sub-sections).
Alternatively, you can press
to view the summary configuration screen,
an example of which is depicted on the next page. By default, this remains
on the screen for 20 seconds, but by pressing
once, it can be held on the
screen until
is pressed again, or until
is pressed. Pressing
will
cause the PC to be turned off.
Summary of Contents for 520 5/XX
Page 26: ...26 1 HP Vectra 500 Series CD ROM Drive Specifications ...
Page 146: ...146 Index ...
