68
3 System Board (P/Ns D3657-63001 and D3661-63001)
Principal Components and Features
Advanced Power Management (APM)
The Advanced Power Management (APM) is a standard, defined by Intel
and Microsoft, for a power-saving mode that is applicable under a wide
range of operating systems. The version APM 1.1 supports the following
modes:
Fully-on, Standby, Suspend,
and
Off
.
The
Suspend
mode, which also used to be known as
Sleep
, is now managed
at the operating system level only. There is no longer the inter-activity
between BIOS
Setup
and operating systems, and no longer a “sleep at” item
in the
Setup
menus. This is to avoid the BIOS from shutting down the
system at the wrong moment.
HP Vectra 500 Series Desktop Backplane
The HP Vectra 500 Series desktop backplane supports two 16-bit ISA
(Industry Standard Architecture) cards, one 32-bit PCI (Peripheral
Component Interconnect) card and has one combination slot for an ISA or
PCI card.
The four expansion card slots are arranged as follows:
•
Slot 1 - (the top slot) can be used for a 32-bit PCI card.
•
Slot 2 - a combination slot that can be used for a 32-bit PCI card or a full-
length 16-bit ISA card (up to 30 cm / 12 inches).
•
Slot 3 - can be used for a full-length 16-bit ISA card.
•
Slot 4 - can be used for a half-length 16-bit ISA card
(up to 15 cm / 6 inches).
2 x ISA
1 x PCI
1 x ISA/PCI
Combination Slot
System Board
Connector
Slot 1
Slot 2
Slot 4
Slot 3
Summary of Contents for 520 5/XX
Page 26: ...26 1 HP Vectra 500 Series CD ROM Drive Specifications ...
Page 146: ...146 Index ...
