114
4 Summary of the HP/Phoenix BIOS
HP/Phoenix BIOS (BIOS version: GJ.07.xx)
Beep Codes (BIOS version: GJ.07.xx)
If a terminal error occurs during POST, the system issues a beep code before
attempting to display the error. Beep codes are useful for identifying the
error when the system is unable to display the error message.
Other
An error message may be displayed and the PC may “hang”
for 20 seconds and then beep. The POST is probably
checking for a mass storage device which it cannot find and
the PC is in Timeout Mode. After Timeout, run
Setup
to
check the configuration.
Beep Pattern
Numeric
Code
Description
B4
This does not indicate an error.
There is one short beep before system
startup.
98
Video configuration failure or
Option ROMs checksum failure
16H
BIOS ROM checksum failure
20H
DRAM refresh test failure
22H
8742 Keyboard controller test failure
2C
RAM failure
2E
RAM failure on data bits in low byte of
memory bus
30
RAM failure on data bits in high byte of
memory bus
46
ROM copyright notice check failure
58
Unexpected interrupts test failure
Message
Corrective Action and/or Explanation
Summary of Contents for 520 5/XX
Page 26: ...26 1 HP Vectra 500 Series CD ROM Drive Specifications ...
Page 146: ...146 Index ...
