HP 316095-B21 - StorageWorks Edge Switch 2/24, Installation Manual

Page: 22 / 154

Switch Features
22 Edge Switch 2/24 Installation Guide
Figure 2 shows the front panel controls, connectors and indicators.
Figure 2: Edge Switch 2/24 front panel features
Power and System Error LEDs
The Power LED, as shown in Figure 2 , illuminates when the switch is connected
to facility AC power and powered on. If the LED extinguishes, a facility power
source, power cord, or power distribution failure is indicated.
The Error LED, as shown in Figure 2 , illuminates when the switch detects an
event requiring immediate operator attention, such as a FRU failure. The LED
remains illuminated as long as an event is active. The LED extinguishes when the
Clear System Error Light function is selected from the Product Manager
application.
The LED blinks if unit beaconing is enabled. An illuminated LED (indicating a
failure) takes precedence over unit beaconing. The LED also blinks (at twice the
beaconing rate) when the IML/RESET button is pressed and held for more than
three seconds.
1
Power LED (green)
2
Error LED (amber
3
Ethernet LAN connector
4
Initial machine load (IML) button
5
SFP fiber optic connectors
6
Port LEDs
3
1
2
4
5
6