HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual Download Page 64

Page: 64 / 154

Installing and Configuring the Edge Switch 2/24

Edge Switch 2/24 Installation Guide

Periodically Synchronize Date and Time

To set the switch to periodically synchronize date and time with the HAFM
application:

1. Click Periodic Date/Time Synchronization to select the option (check mark

in the box). The Date and Time fields are greyed out and not selectable.
Perform one of the following options:

■

Click Activate to enable synchronization and close the Configure Date
and Time dialog box. The switch date and time synchronize with the
HAFM application date and time at the next update period (at least once
daily).

■

Click Sync Now to synchronize the switch and HAFM application
immediately. The Date and Time Synced dialog box displays.

2. Click OK to synchronize the date and time and close the Date and Time

Synced dialog box, then click Activate to enable synchronization and close
the Configure Date and Time dialog box.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



























































































































































Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews:

HP 316095-B21 - StorageWorks Edge Switch 2/24, Installation Manual, Page: 64 / 154

Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews: