HP 316095-B21 - StorageWorks Edge Switch 2/24, Installation Manual, Page: 111 / 154

Using the Embedded Web Server
109 Edge Switch 2/24 Installation Guide
Configure SNMP Trap Message Recipients
Perform this procedure to configure community names, write authorizations, and
network addresses and for up to six SNMP trap message recipients per Edge
switch or director, or up to 12 SNMP trap message recipients per HAFM
appliance. A trap recipient is a management workstation that receives notification
(through SNMP) if a switch event occurs.
To configure SNMP trap recipients:
1. Choose Configure > Management to displays the SNMP tab ( Figure 45 ).
Figure 45: Management page—SNMP tab
a. Click the Enable Authentication Traps check box to enable or disable
transmission of SNMP trap messages to configured recipients.
b. For each trap recipient to be configured, enter a community name of 32 or
fewer alphanumeric characters in the associated Community Name field.
The community name is incorporated in SNMP trap messages to ensure
against unauthorized viewing or use.
c. Click the check box in the Write Authorization column to enable or
disable write authorization for the trap recipient (default is disabled). A
check mark in the box indicates write authorization is enabled. When the
feature is enabled, a management workstation user can change
sysContact
,
sysName
, and
sysLocation
SNMP variables.