HP 316095-B21 - StorageWorks Edge Switch 2/24, Installation Manual

Page: 88 / 154

Installing and Configuring the Edge Switch 2/24
88 Edge Switch 2/24 Installation Guide
5. Choose Enable Call Home Event Notification to perform applicable tests.
The call home test provides a test notification message to a remote support
center. Depending on the option chosen during HAFM installation, the test
notification message is transmitted over telephone lines or LAN.
6. Click Send Test. Call-home and e-mail test messages are transmitted. Click
OK to close the dialog box.
7. Maximize the Hardware View.
8. At the Hardware View, select Enable Call Home Notification from the
Maintenance menu. A check mark displays a check box to indicate call-home
event notification for the switch is enabled, and the menu closes.
Back Up HAFM Configuration Data
It is important to back up the HAFM configuration data. This data is used to
restore the HAFM appliance See the HP StorageWorks Edge Switch 2/24 Service
Manual for instructions on backing up the HAFM configuration data.
Once the HAFM configuration data is backed up, go to “ Connect Cables to Fibre
Channel Ports ” on page 89.
Configure Open Systems Management Appliance
For complete procedures on configuring this optional feature, refer to HP
StorageWorks Edge Switch 2/24 Element Manager User Guide.
Configure Feature Key
For complete procedures on configuring this feature, refer to HP StorageWorks
Edge Switch 2/24 Element Manager User Guide.
Configure Open Trunking
This option is only available if the optional Open Trunking feature is installed.
Choosing this option opens the Configure Open Trunking dialog box. For details
on enabling Open Trunking and configuring such parameters as congestion
thresholds for ports, event notification options, and low BB credit threshold, refer
to HP StorageWorks Edge Switch 2/24 Element Manager User Guide.