horsch Maestro SW 1630, Owner'S Manual

Page: 111 / 132

Maestro SW Owner’s Manual – Ver. 2.4 11/2018 111
www.horsch.com
Track Maintenance
General Information
Three factors: proper use, regular inspections, and maintenance are essential to ensure proper
performance and reliability of your trailed track system.
It is strongly suggested to respect the recommended maintenance and inspection schedule in this section
for best track system life, proper performance, and reduced downtime.
Before any operation, clean all debris and material from the track system and make a general analysis
of the machine condition. Pay attention to components subject to wear such as rubber parts: the quick
identification of unusual wear, particularly of the track. Identifying and resolving issues early reduces
downtime and operating costs.
IMPORTANT!
Routine and extra maintenance must be performed by qualified and authorized
personnel.
Before starting any kind of operation on the machine, disconnect the transmission,
stop the engine, set on the emergency brake, remove the key and allow machine
to stop completely and cool.
Make sure that mobile parts with safe fixed positioning are locked and the tools
used for maintenance are suitable for the type of service.
HORSCH, nor Camso/Camoplast, are not responsible for direct or indirect
damages occurred to people or things due to tampering, removal or modification
of the safety devices, or caused by modifications of the machine without any
previous authorization.
Track Lubrication Table
Use and description Location Viscosity grade
Grease for heavy
mechanical components
Carrier Axle hubs/bearings
and frame pivot joints
NLGI GC-LB
Oil Bath Reservoirs
Idlers and Mid-roller
Hubs and Mid-roller axle
pivots
10W30 Universal
Transmission / Hydraulic Oil