horsch Maestro SW 1630, Owner'S Manual

Page: 108 / 132

108 Maestro SW Owner’s Manual – Ver. 2.4 11/2018
www.horsch.com
Track System Installation
1. Clean the implement thoroughly before proceeding with the installation. Removal of dirt and
debris makes access to the frame and attaching fasteners easier.
2. Move the implement to a hard, level surface to ensure a stable work area to support the
implement during the track system installation.
IMPORTANT! Locate the identification tags, as shown above, on both undercarriages, and record
the model number and serial numbers on warranty certificate for your records.
3. Raise and support implement such that the rear tires are just off the ground.
4. Remove the tire and rim assemblies.
5. Remove the axle and hub assemblies from the implement frame (as required).
6. Install track fitment axle. For two axle mid-roller track systems, make sure the stabilizer
brackets on the axle are facing to the front of the implement. Tighten mounting hardware.
Serial # Plate
IMPORTANT!
Safety of the installation depends on the right operation in lifting and supporting
the machine. Check the work area thoroughly and work in a level area. Respect
safe operating practices, operate in conditions of enough light. Make sure the free
spaces of the work area are suitable for the dimensions of the parts to be handled
and for the lifting equipment maneuvers. Be careful: risk of injury.
IMPORTANT!
Should a motorized lifting device be used, assistance on ground during
operation of handling, coupling and assembly is needed.
Do not stand between lifting device and axle assembly when mounting axles
to implement. Be careful: risk of injury.