horsch Maestro SW 1630, Owner'S Manual

Page: 113 / 132

Maestro SW Owner’s Manual – Ver. 2.4 11/2018 113
www.horsch.com
Weekly Maintenance, or every 50 working hours
1. Grease upper carrier hubs, undercarriage and track system pivot points.
1 – Tandem Pin, Front 5 – Carrier Roller, LH (if equipped)
2 – Bogie Pin, Front Tandem 6 – Carrier Roller, RH (if equipped)
3 – Main Central Pin 7 – Tandem Pins, Rear
4 – Bogie Pin, Rear Tandem 8 – Tension Link Pin
Monthly Maintenance, or every 100 working hours
1. Check track tension. Refer to chart below for recommended setting. Refer to “Adjusting track
tension” for additional information. No tension adjustment is required if spring module is
functioning properly.
TTS Series
Tensioner Type
Spring Setting
70 Spring No preload-onset of compression less one turn
2. Verify wheel bolt torque (always torque after wheel removal regardless of hrs.).
Wheel bolt size Torque (N-m) Torque (ft-lb)
M16 320 +/- 64 236 +/- 47
M20 620 +/- 124 457 +/- 124