horsch Leeb 6 GS, Operating Instructions Manual, Page: 48 / 154

48
Permissible axle load of the fixed axle load
Design rigid steered rigid steered
Track [mm] 1800 - 2250 1800 - 2250 2000 - 2250 2000 - 2250
Axle load [kg]
(25 km/h)
10 000 10 000 10 000 10 000
Axle load [kg]
(40 / 50 km/ h)
10 000 10 000 10 000 10 000
Flange measure-
ment [mm]
2000 2000 2100 2100
2.9.2 Permissible total weight and
tyres
The permissible total weight of the machine
depends on
¾
the permissible drawbar load
¾
the permissible axle load
¾
the permissible tyre load bearing capacity per
wheel pair
Load bearing capacity per wheel pair
Tyres Load index 25 km/h 40 km/h
permissible
load bearing
capacities (kg)
with air
pressure (bar)
permissible
load bearing
capacities (kg)
with air
pressure (bar)
1 340/85-14 LI 151 A8 7,660 3.6 6,900 3.6
7,123 3.2 6,417 3.2
6,587 2.8 5,934 2.8
6,051 2.4 5,451 2.4
2 380/85 R46 LI 151 A8 7,660 2.4 6,900 2.4
7,123 2.1 6,417 2.1
6,587 1.8 5,934 1.8
6,051 1.6 5,451 1.6
3 380/90 R46 LI 172 A8 12,600 5.8 12,600 5.8
4 420/80 R46 LI 151 A8 7,660 2.4 6,900 2.4
7,123 2.1 6,417 2.1
6,587 1.8 5,934 1.8
6,051 1.6 5,451 1.6
The permissible total weight is the sum of
¾
the permissible support load and
¾
the smaller value from
- the permissible axle load
- the tyre load bearing capacity per
wheel pair!
The values for determining the permissible total
weight can be taken from the following tables.
Permissible drawbar load: 4000 kg
With decreasing tyre pressure, the tyre load
bearing capacity will also decrease.
In this case pay attention to the reduced payload
of the machine: