horsch Leeb 6 GS, Operating Instructions Manual, Page: 27 / 154

27
1.9 Unauthorized conversion
and manufacture of spare
parts
Conversions or changes to the machine are only
permitted in agreement with the manufacturer.
Original spare parts and authorized accessories
serve your safety.
This also applies for welding work on load bear-
ing components.
The use of parts other than the ones specified
may result in the rejection of liability for result-
ing damage.
Use only conversion and accessory parts ap-
proved by HORSCH LEEB Application Systems
GmbH, e.g. to maintain the validity of the type
approval as per national and international regu-
lations.
The following machines must be in a condition
that is determined by the corresponding accept-
ance or approval:
¾
Vehicles with a governmental type approval.
¾
facilities and equipment connected with a ve-
hicle with a valid type approval or an approval
for road traffic.
WARNING
Danger of crushing, cutting, being
caught, being pulled in and impact
caused by the breakage of load bearing
components.
The following is generally prohibited:
¾
drilling in frame and undercarriage
¾
enlargement of existing bore holes on frame
and undercarriage
¾
welding on load bearing parts
1.8 Loading and unloading
WARNING
Danger of accident when using an inap-
propriate tractor and if the brake system
of the machine is not connected with
the tractor or not filled!
Hitch the machine properly to the trac-
tor before the machine is loaded on or
off a transport vehicle!
For loading and unloading the machine only
use a tractor which meets the specified power
requirements!
Pneumatic brake system:
Only start to drive with the hitched up
machine after the brake pressure re-
quired to release the brake has been
reached (pressure gauge on tractor).