Hongqi E-HS9, Manual

Page: 154 / 395

4-3.Operating lights and wipers
Rear windshield wiper and washer
152
D
ri
v
in
g
4
Rear wi ndshi eld wiper and w as her
The wiper and washer can be operated by rolling the rear windshield wiper control
handle to different positions.
Turn off.
Turn on the rear wiper.
Washing operation.
After releasing the control handle, the
wiper position is automatically reset.
Washing/wiping operation
After releasing the control handle, the
off position is automatically reset.
◼
Rear windshield wiper and washer working conditions
The power(ignition) switch is placed in the ON mode and the trunk lid is in the closed
state.
◼
Automatic wiping in R gear
When the front windshield wiper is working, the rear windshield wiper is automatically
turned on after the R gear is shifted.
◼
If the windshield washer fluid cannot be sprayed
Check whether there is washer fluid in the windshield washer fluid tank. Check and make
sure the washer nozzle is not blocked.
WARINING
◼
It is forbidden to use windshield washer fluid with ethanol content exceeding
10%
In a high temperature environment, the windshield washer fluid with ethanol content
exceeding 10% will corrode the tail lamps and cause cracks.
Notice
◼
When the rear windshield is dry
Do not use the wiper, otherwise the wiper blade may be damaged.
◼
When the nozzle does not emit washer fluid
If the wiper control handle is rolled to washing position and held for a long time, the
washer fluid pump may be damaged.
◼
When the nozzle is clogged
Do not use a needle or other object to remove foreign objects by yourself, as this will
damage the nozzle.