WEBVISION™
95-7769—01
18
4.
Click
OK
to confirm the deletion.
TIP:
To delete all devices at once, check the
All
check box in
the header and click
Delete
.
Set Mode to Auto
Sometimes when debugging a device, you set the mode to
manual. The Set Mode to Auto feature is a simple option to
set the devices back to auto mode.
To set the devices to auto mode:
1.
Click the
Devices
tab. The
Device List
page appears.
2.
Select the devices that you want to set to auto mode.
3.
Click
Set Mode to Auto
to set the devices to auto
mode. A success message appears indicating that the
devices have been set to auto mode.
NOTE: Check the
Select All
check box to select all the
devices simultaneously.
Download Device Configuration
Once you have made all of the necessary configuration
settings to a device in WebVision, you will need to download
the configuration to the device.
To download a device:
1.
Click the
Devices
tab. The
Device List
page appears.
2.
Select the devices that you want to download by
checking the corresponding check boxes.
3.
Click
Download
to download the selected devices. The
Downloading Device Information bar indicates the
progress of download.
4.
Click
Log
to view the download status.
NOTE: Click
Cancel
to abort the action.
Upload Device Configuration
You can upload device configuration from a device on to
WebVision.
To upload configurations from a device:
1.
Click the
Devices
tab. The
Device List
page appears.
2.
Select the devices whose configurations you want to
upload.
3.
Click
Upload
to upload the settings.
4.
Click
Log
to view the upload status.
NOTE: Click
Cancel
to abort the action.
Replicate Devices
You can replicate existing devices in WebVision.
To replicate a device:
1.
Click the
Devices
tab. The
Device List
page appears.
2.
Click
corresponding to the device that you want
to replicate. The
Replicate Device
dialog box displays
and the selected device displays in the Replicate
Device list.
3.
Select the number of copies that you want to create
using the Number of copies to be created selection field.
4.
Choose a prefix or suffix to name the replicated copy of
the device. Select the Prefix with or Suffix with option as
required.
5.
Type a label name for the device in the
Label
text box.
6.
Click
OK
to save the settings.
NOTE: Click
Cancel
to abort the action.
Device Binding
Binding refers to a configured association either within a
device, or between separate devices on a L
ON
W
ORKS
network.
To view a list of bound devices:
1.
Click
Devices
on the
WebVision
page. The
Device
List
page is displayed.
2.
Click
Device Binding
. The
Device Binding
page is
displayed.
NOTE: Select the required channel from the Select Channel
drop-down list.
3.
The following information displays in tabular format:
•
Source Device
– Lists the source device involved in
the binding.
•
Source Point
– Lists the network object/point of the
source device that is involved in the binding.
•
Target Device
– Lists the target device involved in
the binding.
•
Target Point
– Lists the network object/point of the
target device that is involved in the binding.
•
Link Status
– Shows the binding status. The status
can be bound or unbound.
To add devices for binding:
1.
Click
Devices
on the
WebVision
page. The
Device
List
page is displayed.
2.
Click
Device Binding
. The
Device Binding
page is
displayed.
3.
Click
Add
. The
Add Device Binding
box is displayed.
4.
Select the following:
• Channel
• Source Device
• Source Point
• Target Device
• Target Point
5.
Click
OK
. The binding is created in WebVision and has
to be downloaded to the controllers.
To delete bindings:
1.
Click
Devices
on the
WebVision
page. The
Device
List
page is displayed.
2.
Click
Device Binding
. The
Device Binding
page is
displayed.
3.
Select a pair of bounded devices that you want to delete
and click
Delete
. The bindings in WebVision are
deleted. You have to invoke download to delete the
bindings in the devices.
To download device bindings:
1.
Click
Devices
on the
WebVision
page. The
Device
List
page is displayed.
2.
Click
Device Binding
. The
Device Binding
page is
displayed.
