Honeywell Thor VM2, User Manual

Page: 276 / 398

264 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Menu Options
File
The File menu contains information for working with the configuration files.
About
Displays version and copyright information for the Configuration Cloning Utility.
Open
Opens a configuration file. The CCU looks for configuration files in the \System\DDF
folder. CCU can open the following files types:
• ddf files - These files contain the factory default values for the software. These files
are placed on the Thor VM2 when the applicable software was installed or upgraded.
Use this option if you wish to start a configuration settings file based on the factory
defaults.
• ccf files - These files contain the modified values for the software settings. These files
are created with the CCU . ccf files are encrypted for security. Once a ccf file is created
on one Thor VM2 it can be copied to other Thor VM2s to duplicate the configuration.
An existing ccf file can be opened, modified, applied to the Thor VM2, saved, saved
with a different name, etc.
Close
Closes the open data file.
Save
Saves the open data file as a ccf file.
• If a ccf file was opened, it is saved with the same name and in the same location.
• If a ddf file was opened, a prompt is displayed for the name to assign to the new ccf
file. By default a new file is saved at \System\DDF though a different location can be
specified.
Save As
Saves the open data file as a ccf. If a ccf file was opened, this option allows a new name
or location for the data file to be specified during the save process.