Honeywell Thor VM2, User Manual, Page: 325 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 313
Auth Server Type 1 Specifies the type of authentication server.
Options are: Type 1 (ACS server) and Type 2 (non-ACS server)
TTLS Inner
Method Auto-EAP Authentication method used within the secure tunnel created by
EAP-TTLS.
Options are:
AUTO-EAP (Any available EAP method)
MSCHAPV2
MSCHAP
PAP
CHAP
EAP-MSCHAPV2
PMK Caching Standard Type of Pairwise Master Key (PMK) caching to use when WPA2 is in
use. PMK caching is designed to speed up roaming between APs
by allowing the client and the AP to cache the results of 802.1X
authentications, eliminating the need to communicate with the
ACS server. Standard PMK is used when there are no controllers.
The reauthentication information is cached on the original AP. The
client and the AP use the cached information to perform the four-
way handshake to exchange keys. Opportunistic PMK (OPMK) is
used when there are controllers. The reauthentication information
cached on the controllers. The client and the controller behind the
AP use the cached information to perform the four-way handshake
to exchange keys.
If the selected PMK caching method is not supported by the
network infrastructure, every roam requires full 802.11X
authentication, including interaction with the ACS server.
If the active profile is using WPA2 CCKM, the global PMK Caching
setting is ignored and the client attempts to use CCKM.
Options are: Standard, OPMK
WAPI Off Default is Off and dimmed (cannot be changed).
TX Diversity ABG: On How to handle antenna diversity when transmitting packets to the
Access Point.
Options are: Main only (use the main antenna only), Aux only (use
the auxiliary antenna only), or On (use diversity or both antennas).
RX Diversity ABG: On Start on
Main How to handle antenna diversity when receiving packets from the
Access Point.
Options are: Main Only (use the main antenna only), Aux Only (use
the auxiliary antenna only), On-start on Main (on startup, use the
main antenna), or On-start on Aux (on startup, use the auxiliary
antenna).
Frag Thresh 2346 If the packet size (in bytes) exceeds the specified number of bytes
set in the fragment threshold, the packet is fragmented (sent as
several pieces instead of as one block). Use a low setting in areas
where communication is poor or where there is a great deal of
wireless interference.
This parameter cannot be changed.
RTS Thresh 2347 If the packet size exceeds the specified number of bytes set in the
Request to Send (RTS) threshold, an RTS is sent before sending
the packet. A low RTS threshold setting can be useful in areas
where many client devices are associating with the Access Point.
This parameter cannot be changed.
Parameter Default Function