268
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
4. Tap File > Save and specify a file name for the ccf file.
5. Tap Registry > Apply settings
6. Reboot the Thor VM2 for the new settings to take effect.
7. The ccf file can be used to configure another Thor VM2. See Example 4.
Example 4: Clone settings to another device
1. Create a ccf file using any of the above examples.
2. Copy the ccf file to \System\DDF on the destination Thor VM2.
Note:
Rather than using the CCU GUI, the command line can be used to apply the settings to the
destination device.
3. Open the CCU on the destination device.
4. Tap File > Open and select the ccf file that was copied to the device.
5. Tap Registry > Import.
6. When prompted to Default all Non-Configured Parameters:
•
Tap Yes to set all parameters not configured in the ccf file to defaults on the
destination device.
•
Tap No to apply the values from the ccf file and leave all other parameters as-is on the
destination device.
•
Tap Cancel to exit with no changes to the destination device.
7. Reboot the Thor VM2 for the new settings to take effect.
Summary of Contents for Thor VM2
