manualshive.com logo in svg

Honeywell Thor VM2, User Manual, Page: 73 / 398

Share
Download
Honeywell Thor VM2 User Manual Download Page 73

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

61

1. Determine the position for mounting the RAM ball base. Be sure to position the RAM 

bracket to allow access to the switches and ports on the bottom of the Thor VM2.

2. Attach the RAM ball base to the vehicle mounting surface using three or four 1/4 

bolts (not included) or equivalent fasteners. If the mounting kit includes cone 
washers, use those as illustrated below. 

IMPORTANT

: Mount to the most rigid surface available.

Mounting Dimensions

Note:

Drill and tap holes for three 1/4 bolts. Drawing not to scale.

120º

120º

60º

60º

2.75" / 69.85 mm

3.69" / 93.73 mm

Summary of Contents for Thor VM2















































































































































































































































































































































































































Reviews:

No comments